MA 114 HF Welded tube mill line
Specification:
Finished product: Round Tubes, Square and Rectangular Hollow Sections
Round Tube Outside Diameter: Min 22, Max 114mm
Square Hollow Section: Min25x 25, Max 90 x 90 mm
Rectangular Hollow Section: Min 25 x40, Max 80x 120 mm
Tube Thickness: Min 1.2, Max 4.5 mm
Forming Line Speed: Max 60m/min (Square and Rectangular Hollow Shapes are produced at lower speeds
depending on side to wall thickness ratio)
Tube Cut Length: Min 4 Max 12 meter
Length Accuracy: ± 3mm
Main Drive Motor: DC 90kW × 2
Line Composition:
Double Mandrel Uncoiler.
Shear and TIG Welder.
Horizontal Strip Accumulator.
Forming, Welding, Cooling and Sizing Section.
Computer Flying Saw Cut-Off.
Straightener:
End Milling and Chamfering Machine
Baling Press
Driven Roller Run Out Table, Inspection table & Collectors.
Solid State H.F. Induction Welder: 300 kW, Solid State (400k W, Vaccum Tube Type) Type
Rolls: Rolls are manufactured out of AISI D3 D2 ES2100
Electrical Panels
Related category: For more information about Tube Mill Line , click the link.
FAQ
The MA 114 HF Welded tube mill line is a specialized production line designed to manufacture welded steel pipes and tubes using high-frequency (HF) welding technology. It efficiently transforms pre-slit carbon steel cold-rolled (CR) or hot-rolled (HR) coils into various pipe shapes, including round, square, and rectangular hollow sections.
-
Finished Products: Round tubes, square and rectangular hollow sections
-
Round Tube Diameter: 22mm to 114mm
-
Square Hollow Section: 25x25mm to 90x90mm
-
Rectangular Hollow Section: 25x40mm to 80x120mm
-
Tube Wall Thickness: 1.2mm to 4.5mm
-
Forming Line Speed: Up to 60 meters per minute (Note: Square and rectangular shapes are produced at lower speeds depending on side-to-wall thickness ratio)
-
Tube Cut Length: 4 to 12 meters
-
Length Accuracy: ±3mm
-
Main Drive Motor: DC 90kW × 2
-
High-Frequency Welder Power: 300 kW (Solid State) or 400 kW (Vacuum Tube Type)
The machine is capable of processing pre-slit carbon steel cold-rolled (CR) or hot-rolled (HR) coils suitable for welding applications.
